To screenshot a specific area on Windows, press Windows+Shift+S, make sure Rectangle mode is selected, and drag a box around the part of the screen you want. The capture is copied to the clipboard, and a notification lets you open it in Snipping Tool to save or mark it up. If you need to capture the same area again and again, with identical dimensions every time, a saved region in a screenshot tool is much faster than redrawing the box. This guide covers both, plus tips for precise selections.
Method 1: Windows+Shift+S (fastest)
This works on Windows 10 and 11 without opening anything first.
- Press Windows+Shift+S. The screen dims and a small toolbar appears at the top.
- Choose Rectangle mode, the first icon, if it is not already selected.
- Click and drag from one corner of the area to the opposite corner, then release.
- The capture is copied to the clipboard. Paste it anywhere with Ctrl+V.
- To save it, click the notification that appears, then press Ctrl+S in Snipping Tool.
Press Esc at any point to cancel. On Windows 11, Print Screen may open the same overlay, depending on your keyboard settings.
Method 2: The Snipping Tool app
Opening Snipping Tool directly gives you a few extra options before you capture.
- Open the Start menu, type Snipping Tool and open it.
- Choose Rectangle from the mode list.
- If you need time to set something up, such as opening a menu, choose a delay.
- Click New, then drag around the area.
- Mark up the capture with the pen or highlighter if you like, then save it.
Other shapes: freeform, window and full screen
The same toolbar offers other modes:
- Freeform lets you draw any shape around an object, such as a chart or a person in a video call. The saved image is still a rectangle, with the area outside your shape filled in. See our guide to freeform screenshots on Windows.
- Window captures a whole window with one click.
- Full screen captures everything.
Snipping Tool remembers the last mode you used, so if a capture comes out as a whole window or a strange shape when you expected a rectangle, check which mode is highlighted in the toolbar before you drag. Bulk Captures offers the same choice of region, freehand selection, window and full screen, with a separate hotkey for each, so you never have to switch modes in a toolbar first.
Tips for precise selections
Getting exactly the right area takes a little care:
- Leave a small margin around buttons and text. Cropping too tightly makes the screenshot look cramped and can clip the edges of letters.
- Zoom the content, not the screenshot. If the area is tiny, increase the app's zoom first (often Ctrl and the plus key) so the capture is larger and sharper. Enlarging a small screenshot afterward makes it blurry.
- Hide the pointer if it gets in the way. Move it off the area before you release the mouse.
- Close notifications that might pop up over the area while you are selecting.
Selecting across two monitors
With Windows+Shift+S you can drag a rectangle that spans two monitors, which is handy for a wide spreadsheet or a timeline stretched across both screens. Be aware that if the monitors use different display scaling, the part on one screen may look slightly softer or a different size in the result. For the cleanest image, move the content onto one monitor before capturing.
Checking the result before you send it
Open the capture at 100 percent zoom before sharing it. Snipping Tool and most viewers shrink images to fit the window, which can hide a clipped edge or a stray notification. A quick check at full size takes seconds and saves resending.
Capturing the same area every time
Drawing the rectangle by hand is fine for a one-off. It is a problem when you need a series of captures of the same spot, such as:
- A chart or dashboard panel you capture every day for a report.
- A section of an app shown in several steps of a manual, where each image must be the same size.
- Before-and-after comparisons, where any difference in framing makes the comparison harder.
- An area you want captured automatically every few seconds or minutes.
Every hand-drawn selection is slightly different, usually by a few pixels. In a document, that means images that do not line up and a set that looks careless.
Bulk Captures solves this with saved regions: you draw a fixed region once, and reuse it as often as you like. Each region capture has its own hotkey and remembers its settings, so every capture has identical dimensions and position. Combine a saved region with interval capture and that exact area is captured automatically on a schedule, which is ideal for monitoring a panel of a dashboard or recording progress in one part of the screen. Our guide on how to screenshot the same area repeatedly goes into more detail.
Comparing the options
| Method | Saves a file? | Same area again? | Best for |
|---|---|---|---|
| Windows+Shift+S | Clipboard, plus file if auto-save is on | No, redraw each time | Quick one-off captures |
| Snipping Tool app | Yes, with Ctrl+S | No | Captures with delay and markup |
| Saved region with a hotkey | Yes, named automatically | Yes, pixel identical | Repeated captures, documentation, monitoring |
Saving region captures
A few choices make region screenshots more useful once they are saved:
- Format: PNG for interface and text, JPG or WebP if the area is mostly photos. Our PNG vs JPG guide explains the difference.
- Name: include the date and a counter, or a short label, so captures of the same area sort in order.
- Folder: keep each project or series in its own folder rather than mixed into Pictures, Screenshots.
- Clipboard: if you mostly paste into chats, keep a copy on the clipboard as well as saving the file.
Troubleshooting
- Windows+Shift+S does nothing: another app may be using the shortcut, or Snipping Tool may need repairing. See our guide to fixing Print Screen not working.
- The capture looks blurry: check display scaling and avoid enlarging small captures. Capture at a larger app zoom level instead.
- The area changed before the capture: menus and hover effects can close as soon as you start selecting. Use a delay, then open the menu while the timer runs.
Frequently asked questions
What is the shortcut to screenshot part of the screen?
Windows+Shift+S opens the capture overlay. Drag a rectangle around the area and it is copied to the clipboard.
How do I screenshot the exact same area every time?
Use a tool with saved regions. In Bulk Captures you draw a region once and reuse it, so every capture has identical dimensions.
Can I screenshot an irregular shape?
Yes. Snipping Tool has a Freeform mode, and Bulk Captures also offers a freehand selection.
